zq3332427 Publish time 2021-12-24 02:51:51

SONY D808K Spindle overspeed




Hello teacher gao:
The entire SONY D808 has replaced the capacitors and cleaned the motherboard with ultrasonic alcohol. The bald assembly has been tested on other machines. Now the spindle speed is too fast when reading the disc, so the reading is normal, but if you interfere with the spindle speed by hand TOC can be read at normal speed. Where should the spindle speed be too fast? ? ? ,thanks

kaosun Publish time 2021-12-28 12:32:58

Could you replace the drive chip MPC1716?

zq3332427 Publish time 2021-12-29 03:46:48

I was about to try to replace MPC1716. I received a bad D101 a few days ago and prepared to replace it, but when I came back and opened it, I saw that the motherboard and bald head were very new, so I didn’t dismantle the MPC1716, and replaced all the capacitors of the 101 motherboard. Cleaned and installed. , D-101 has been repaired, and it is in good condition. Now I am looking for an MPC1716

kaosun Publish time 2022-03-02 10:33:48

Nice to hear!
Pages: [1]
View full version: SONY D808K Spindle overspeed