kaosun Publish time 2016-06-06 09:58:17

D515 no laser

A D515 dosen't read disc. Inspection indicates the laser doesn't work and no beam emits. After measuement, a dual transistor Q452 (xn4504) is found broken. Later it's replaced.
There're a few SMT 220uf caps are also replaced. Can you find them?


tfb Publish time 2016-09-19 18:26:20

very good:lol

Cyhui Publish time 2016-10-23 19:39:23

本帖最後由 Cyhui 於 2016-10-23 20:14 編輯

Good Morning ,Mr Kaosun,
My D515 have same issues,when I open the machine found that Q452 was
burn down , I have try to replaced Q452 (xn4504),but fail still not working no laser beam come out , would you please give me some idea?thankyou for your support.

kaosun Publish time 2016-10-24 09:44:11

Just follow the post and check them step by step to see what else is down. Are you sure you replaced an identical XN4504?

Cyhui Publish time 2016-10-25 06:32:04

static/image/common/user_online.gif kaosun static/image/common/clock.gif 2016-10-24 09:44
Just follow the post and check them step by step to see what else is down. Are you sure you replaced ...

Good Morning Mr.Kaosun

Thank you for your quick reply

Today I had replaced another XN4504 still not working . when I plug in power with origin sony 9V power supply . Ismell badthan found it XN4504 burn out again .would you have any idea or suggestion ? thankyou for your support .:)


kaosun Publish time 2016-10-27 11:34:33

If your XN4504 burn out, pls check Q451 XN4601 which is a PWM driver. If it shorted inside, it'll output DC to your xn4504 so that it dies.

Cyhui Publish time 2016-11-07 19:44:18

本帖最後由 Cyhui 於 2016-11-07 19:48 編輯

Dear MasterKao

Waiting long long time for XN4601 and arrived yesterday,I had replaced XN4504 and XN4601 ,after replacment everthing ok but the laser still not beam on. Anyway I will recheck again and come back will you .

Thankyou !

Cyhui Publish time 2016-11-23 20:31:25

本帖最後由 Cyhui 於 2016-11-23 22:41 編輯

Dear Master Kao

After reinstall all XN-4504 and Xn4601 and SMD220UF Cap ,the machine now work fine

thank you




kaosun Publish time 2016-11-24 14:03:32

:victory:

codebrother Publish time 2021-05-01 03:12:01

Hi Kaosun, my IC504 pin 10 (vout) don’t have 4v, do you know where is the problem on it? Vcpu have 2v and it cause not laser out. Thanks
Pages: [1] 2
View full version: D515 no laser