Kaosun's CD Players

 Forgot password?
 Repair!
Search
View: 6884|Reply: 4

D-321 no sound on left headphone channel

[Copy link]

3

Threads

8

Posts

1967

Credits

Gold Member

Rank: 6Rank: 6

Credits
1967
Post time 2019-05-17 17:54:41 | Show all posts |Read mode
Edited by Timing.Fanatic at 2019-05-17 17:56

Hi,

I've recently picked up a D-321 and there is no sound on the left headphone channel.  Beeps sound good on both channels though.  Looking at the SMs found on this site (thanks!) it looks like I should consider replacing C106?

Here are some other observables:
- Line out works well

- AVLS in OFF position produces almost no sound
- Moving the AVLS switch from OFF -> 2 produces a slight bit of sound on the left channel
- AVLS positions appear to work all right on right channel depending on volume level


Thoughts?  I don't have a oscilloscope (only DMM).

Thanks.



Reply

Use magic Report

0

Threads

2

Posts

151

Credits

Member

Rank: 2

Credits
151
Post time 2019-05-17 19:47:08 | Show all posts
1 clean avls swch s301  and vol potentiometer rv301
2 replace c106 c206, ud better replace all the white capacitor
Reply Support Not support

Use magic Report

0

Threads

2

Posts

151

Credits

Member

Rank: 2

Credits
151
Post time 2019-05-17 20:07:39 | Show all posts
replace amp chip with la4534,its much better than 4533
Reply Support Not support

Use magic Report

3

Threads

8

Posts

1967

Credits

Gold Member

Rank: 6Rank: 6

Credits
1967
 Author| Post time 2019-05-21 01:27:58 | Show all posts
Thanks!  I'll go ahead and change out those capacitors!

I'll also look into the LA4534 - that may be a secondary project after I get the headphone stuff working!
Reply Support Not support

Use magic Report

3

Threads

8

Posts

1967

Credits

Gold Member

Rank: 6Rank: 6

Credits
1967
 Author| Post time 2019-10-21 15:40:20 | Show all posts
So I am finally getting around to doing this.  I'm not electronics savvy but I understand that in most cases one should not replace capacitors with a different capacitance than specified, but in this application, can I replace the two 330uF 2V caps. with 470uF 6.3V caps?

I don't have a Al. Elect. 330uF with the appropriate dimensions on hand, while the 470uF will fit.
Reply Support Not support

Use magic Report

You have to log in before you can reply Login | Repair!

Points Rules

Archiver|Mobile|Dark room|Kaosun's CD players

2024-04-25 09:32 GMT-6 , Processed in 0.044760 second(s), 20 queries .

Powered by Discuz! X3.4

Copyright © 2001-2020, Tencent Cloud.

Quick Reply To Top Return to the list